Day and Night Switch Configuration

The configuration of the Day and Night Switch Mode in Hikvision IP cameras can be done through the camera’s web interface using a computer or mobile device. Here are the steps to configure it:

1. Access the camera’s web interface by entering the camera’s IP address in a web browser.
2. Log in to the camera using your username and password.
3. Go to the “Configuration” menu and select “Image.”
4. Click on the “Day/Night” tab.
5. Under “Mode Settings,” select “Auto” to enable automatic switching between day and night mode.
6. If you want to set a specific time for the camera to switch between modes, select “Schedule” and set the start and end times for each mode.
7. Under “Day Mode Settings” and “Night Mode Settings,” you can configure the camera’s image settings for each mode, such as brightness, contrast, and saturation.
8. Click “Save” to apply the changes.

Note that the specific configuration steps may vary depending on the Hikvision camera model and firmware version. Also, make sure to test the camera’s day and night mode switching to ensure that it is working correctly.